Residential Electrician in Silverdale, NSW
What is included
What Is Included in Our Residential Electrician
- We check the switchboard for tripped breakers, a safety switch that will not reset or a blown fuse
- We trace the dead or tripping circuit from the board out to the point where it fails
- Power points, light fittings and ceiling fans are repaired or replaced where they are damaged, loose or dead
- New power points and lights are added, with cable run through the ceiling or wall to each new position
- Old or damaged wiring is replaced, from a single failed run of cable to rewiring a whole house
- Circuit breakers and safety switches that fail are replaced, or the whole switchboard is upgraded if it is worn out
- Smoke alarms and surge protection are fitted where you ask for them, and alarms are tested on the spot
- Every circuit we touched is tested before power is left on, and we walk you through what was done
Why us
Why Choose Us for Residential Electrician?
Accountable for every job, long after the day
Every residential electrician work job is done by the people who will still be here next year.
Tested and signed off before we leave
Everything we touch on your residential electrician work is tested before we go, you get walked through exactly what was done.
Local electricians, not a call centre
An electrician answers the phone and the same faces come back if the job runs over a day.
How the job runs
We find the fault before we touch anything
The call about the fault
Describe what happens and when: a power point that is dead, lights that flicker, a breaker that trips when you run the oven. Tell us if it started after a storm, after a new appliance, or for no reason you can see. Those details point us to the likely circuit before we arrive.
Testing the circuit and quoting
On site we check the switchboard first, then test the circuit from the board outwards until the fault shows itself. We tell you what we found and what the repair involves. Then you get an upfront quote, with no pushy upselling.
The work and the safety check
We protect floors and furniture, then do the repair or the new work. Before we finish we test every circuit we worked on and check the safety switches trip as they should. The work area is cleaned up and we explain what was done, in plain words.
Common questions
Frequently Asked Questions
What electrical and antenna services do you offer?
We install and repair digital TV antennas, install Starlink, mount TVs on walls and install CCTV cameras and security systems. On the electrical side we do switchboard upgrades, electric hot water repairs, interconnected hardwired smoke alarms, EV chargers and general home and commercial electrical work.
Do you work on homes and on businesses?
Yes, both. Homes make up the bulk of the antenna, wall mount and smoke alarm work. For businesses the work includes fit-outs, maintenance, test and tag, and security system installation. Tell us which you have when you call so we can ask the right questions.
Which areas do you cover?
We are based in Silverdale and work in Warragamba, Mulgoa, Wallacia, Luddenham, Bradfield, Bringelly, Rossmore, Austral, Leppington, Smeaton Grange and Camden. In general we work within about a 30 to 45 minute radius of Silverdale. If you are just outside that, call and ask.
Do you work after hours?
We list ourselves as open 24 hours, Monday to Sunday. For anything urgent, call 0438 653 022 and describe what is happening. If something smells hot or a switch will not reset, say so straight away.
How do I choose the right digital TV antenna?
It depends on where you are, how far the signal has to travel, what is in the way and how many TVs you want to feed. Tell us your suburb and what the picture is doing, such as dropping out, pixelating or missing channels. We can then look at the roof and the existing cable and recommend what suits.
What do I need to know before a Starlink install?
The dish needs a clear view of the sky, so the first question is where it can sit without trees or roof lines blocking it. We also look at how the cable gets inside and where the router will go. Photos of the roof, the wall and the room where the router will live help when you call.
What should I send you for a CCTV quote?
Tell us how many cameras you want and where they should look, such as the front door, driveway or back yard. Say whether you want to watch from your phone and whether there is a spot for a recorder. A few photos of the outside walls and the eaves help us see how cables will run.
Can you mount my TV on any wall?
Usually, but the wall type matters. Brick, timber stud and plasterboard are each fixed differently, and a large TV needs a firm fixing point. Tell us the TV size, the wall type and where you want the power and antenna lead, so the cabling can be hidden if the wall allows.
How much does a job cost?
The price depends on the job, so we do not quote figures over the phone for anything that needs a look first. The first step is a look at the site, or photos for a small job. You then get a clear quote with no pushy upselling.
What do I need to know about EV charger installation?
The charger has to connect to your switchboard, so the distance from the board to where the car parks is the main question. Tell us the make of your car and where you park it. We install chargers for owners of Tesla, Nissan Leaf, BYD, Hyundai and Kia vehicles, and a photo of your switchboard helps us see what is there.
My hot water has stopped working. What should I tell you?
We repair electric hot water. Tell us whether there is no hot water at all or only a little, whether the unit is leaking, and whether the switchboard has tripped. If you can see water running from the unit, turn off the water supply to it and call us.
What is different about hardwired, interconnected smoke alarms?
Hardwired alarms are connected to the mains power of the building rather than running only on a battery. Interconnected means that when one alarm sounds, every alarm in the building sounds together. We install them as part of the electrical work, so the wiring is run and tested at the same visit.
Related work
Other jobs we get called out for
electrical contractor work
Electrical work for homes and businesses around Silverdale and western Sydney, including fit-outs, maintenance, test and tag, switchboard upgrades, extra outlets and security cameras.
Read moredigital TV antenna installation
A digital TV antenna fitted to your roof or wall, cabled to each TV point and tuned so the channels come in clean across western Sydney.
Read moreTV antenna repairs
Repairs to TV antennas, cables, connectors and splitters when the picture breaks up or channels drop out, on homes and businesses around Silverdale and western Sydney.
Read moreServing Silverdale and The Surrounding Areas
Where we work
Ready when you are
Book Residential Electrician in Silverdale Today
Tell us in a line what is not working and where in the house, and send a photo of your switchboard with the cover closed. The room and the board together usually tell us where to start looking.
0438 653 02224 hours a day, 7 days a week
Not urgent? Send us the job instead
