Electrician in Smeaton Grange, NSW
Smeaton Grange, units and warehouses
Smeaton Grange is a business and industrial estate beside Narellan, with warehouses, factory units and trade showrooms along Smeaton Grange Road and the streets around it. The work is for the units themselves: a roller door, an office at the front, a mezzanine or a workshop at the back. Jobs are often planned around the trading day, because a shop or factory cannot always stand still while we work.
Access is by a loading apron or a shared driveway, and parking depends on the unit. Many sites have roller doors that open only at set hours, a keypad or a tenant who has to let us in, and some units are tenanted while the landlord holds the keys to the common board. On busy mornings, trucks use the same aprons, so we work out where to stand and when. The main switch may be in a plant room or an outdoor cabinet.
The buildings are mostly concrete panel or steel-framed sheds with metal roofs, and many are fed with three-phase supply. Unit fit-outs often add offices inside the shell, with lighting, power and data cabling run across open roof trusses. Tenants change, and so does the equipment, so a board can carry circuits from three previous fit-outs. Antennas and satellite are rarely the issue here. Security and power are.
What we do here most
What Smeaton Grange units and trade premises need
Business premises here have the same needs again and again: power that suits the equipment, and security that suits the stock.
Electrical Contractor
Fitting out a new unit for a trade tenant
A bare warehouse shell is handed over with a board and little else. A tenant then wants lighting across the roof trusses, power outlets for benches and machines, and an office with data cabling at the front. We work from the board outwards, deciding where three-phase is needed and where single-phase will do, and keep the cable runs tidy along the steel.
Switchboard Upgrades
A crowded board in an older factory unit
After years of tenants and machines, a unit board can be packed with breakers added one at a time, some of them feeding things nobody can now identify. Upgrading means tracing every circuit, working out the load across the three phases and fitting a board that has room to grow. The unit usually has to be shut off for part of a day, so timing is planned with the tenant.
Security System Installation & Maintenance
An alarm for a showroom and storeroom
A trade showroom has stock in front and a storeroom behind, and a roller door that opens straight onto the apron. A system here covers the roller door, the personnel door, the showroom floor and the office, with sensors across open space and a keypad near the entry. If a system is already fitted, maintenance usually means testing sensors and finding why one keeps tripping.
CCTV Camera Installation
Cameras across a loading apron and yard
Units here share aprons and yards, and theft and damage usually happen after hours around the roller doors. Cameras go under the eave or on the steel, aimed at the door, the apron and the vehicle area. Power and network cabling runs along the building to a recorder in the office, and the long clear spans of a warehouse mean the cable route needs planning first.
If it is urgent
If the power fails in a Smeaton Grange unit
- 1Check whether neighbouring units are dark too. If the whole estate road is out, it is the supply, not your board, and nothing inside your unit needs touching.
- 2Leave the main board, the plant room and any three-phase equipment alone. Turn off machines at their own switches so nothing restarts when power returns.
- 3When you ring 0438 653 022, tell us the unit address, who holds the key, whether the roller door opens manually and which equipment lost power.
Common questions
Frequently Asked Questions
What electrical and antenna services do you offer?
We install and repair digital TV antennas, install Starlink, mount TVs on walls and install CCTV cameras and security systems. On the electrical side we do switchboard upgrades, electric hot water repairs, interconnected hardwired smoke alarms, EV chargers and general home and commercial electrical work.
Do you work on homes and on businesses?
Yes, both. Homes make up the bulk of the antenna, wall mount and smoke alarm work. For businesses the work includes fit-outs, maintenance, test and tag, and security system installation. Tell us which you have when you call so we can ask the right questions.
Which areas do you cover?
We are based in Silverdale and work in Warragamba, Mulgoa, Wallacia, Luddenham, Bradfield, Bringelly, Rossmore, Austral, Leppington, Smeaton Grange and Camden. In general we work within about a 30 to 45 minute radius of Silverdale. If you are just outside that, call and ask.
Do you work after hours?
We list ourselves as open 24 hours, Monday to Sunday. For anything urgent, call 0438 653 022 and describe what is happening. If something smells hot or a switch will not reset, say so straight away.
How do I choose the right digital TV antenna?
It depends on where you are, how far the signal has to travel, what is in the way and how many TVs you want to feed. Tell us your suburb and what the picture is doing, such as dropping out, pixelating or missing channels. We can then look at the roof and the existing cable and recommend what suits.
What do I need to know before a Starlink install?
The dish needs a clear view of the sky, so the first question is where it can sit without trees or roof lines blocking it. We also look at how the cable gets inside and where the router will go. Photos of the roof, the wall and the room where the router will live help when you call.
What should I send you for a CCTV quote?
Tell us how many cameras you want and where they should look, such as the front door, driveway or back yard. Say whether you want to watch from your phone and whether there is a spot for a recorder. A few photos of the outside walls and the eaves help us see how cables will run.
Can you mount my TV on any wall?
Usually, but the wall type matters. Brick, timber stud and plasterboard are each fixed differently, and a large TV needs a firm fixing point. Tell us the TV size, the wall type and where you want the power and antenna lead, so the cabling can be hidden if the wall allows.
How much does a job cost?
The price depends on the job, so we do not quote figures over the phone for anything that needs a look first. The first step is a look at the site, or photos for a small job. You then get a clear quote with no pushy upselling.
What do I need to know about EV charger installation?
The charger has to connect to your switchboard, so the distance from the board to where the car parks is the main question. Tell us the make of your car and where you park it. We install chargers for owners of Tesla, Nissan Leaf, BYD, Hyundai and Kia vehicles, and a photo of your switchboard helps us see what is there.
My hot water has stopped working. What should I tell you?
We repair electric hot water. Tell us whether there is no hot water at all or only a little, whether the unit is leaking, and whether the switchboard has tripped. If you can see water running from the unit, turn off the water supply to it and call us.
What is different about hardwired, interconnected smoke alarms?
Hardwired alarms are connected to the mains power of the building rather than running only on a battery. Interconnected means that when one alarm sounds, every alarm in the building sounds together. We install them as part of the electrical work, so the wiring is run and tested at the same visit.
Everything we do here
Services in Smeaton Grange, NSW
Most of these services apply to units and trade premises around Smeaton Grange, though the focus here is on power and security rather than antennas.
Local, and on the phone
Talk to us about a Smeaton Grange job
Call or email and tell us whether the unit is single-phase or three-phase, and what hours the premises trade. That tells us when we can have power off and how to plan the visit around your trading day.
0438 653 02224 hours a day, 7 days a week
Not urgent? Send us the job instead